• 没有分类
  • 没有分类
  • 没有分类
  • 没有分类
  • 没有分类
  • 没有分类
Production of Septa for Headspace Vial
https://aijirentechinc.com/aijirenvials

Production of Septa for Headspace Vial

Aijiren is a manufacturer specializing in the production of Silicone&PTFE. Aijiren purchases high-quality Teflon raw materials and PTFE, Silicone, butyl, etc. in order to produce higher-quality Septa, which can be applied to Autosampler Vial, Headspace Vial, COD Test Tube and EPA Vials, Aijiren has been working hard in order to provide a better seal for Vials.

Share:
Content
Aijiren uses a machine to cut Septa, and only needs to adjust the cutting setting to the required diameter. Aijiren uses laser cutting instead of traditional blades to reduce the impact on Septa ingredients. The laser cutting has neat edges, clean sections, and uniform size specifications, eliminating the cost and loss of blade cutting molds. And the pressing of Aijiren is thinner, and the thinner thickness is more suitable for puncture. If the customer's Autosampler is a large blunt needle, Aijiren recommends purchasing pre-cut septa, but Septa is not suitable for repeated injections, otherwise it may fall into the bottle. If it is a sharper needle, you can consider buying ordinary Septa. The Septa provided by Aijiren is more resilient and can withstand about 5 punctures. However, in order to avoid Septa from falling off and contaminating the sample, Aijiren recommends Vias, Cap and Septa are all disposable use.
Inquiry
* Name:
* Email:
Country:
Tel/Whatsapp:
* Message:
More Aijiren Vials