11mm 0.3ml snap micro vial plastic

300ul volume plastic vials, 11mm snap neck finish, 11.6*32mm, Vial material: polypropylene, cap material: polyethylene, septa material: ptfe/silicone, package: 100pcs/pk

micro vial pp micro vial

Free Sample Get Price

9mm 300ul PP Screw neck Micro Vial for HPLC

Glass vial inerts with polymer feet for 2ml autosampler vials

Content

The 11mm snap cap & septa combination is convenient for direct use. The polyethylene material (for cap) is softer than the polypropylene material(for vial), which can reduce the breakage caused by the high pressure of the cover, but it is not recommended to reuse the cover multiple times Polypropylene has good chemical inertness and can be used for sample analysis of unstable compounds. The hollow design of the cone bottom allows the analyte to be absorbed by the needle even in very small amounts

Inquiry

More Aijiren Vials

Optimize your sample analysis with our Glass Micro Vial Inserts for 2ml HPLC vials! These inserts ensure precision and efficiency in every test. High-quality glass material Perfect fit for 2ml H...

Micro Vial Insert

Precision-Engineered Vial Inserts: Our glass spring bottom vial inserts are designed to enhance the efficiency and accuracy of your sample analysis. Ideal for use in a variety of chromatographic ap...

Glass Spring Bottom Vial Insert

Volume Options: 150µl, 250µl, 300µl Enhance your laboratory efficiency with our Polymer Spring Micro Inserts, designed to provide superior performance and reliability...

Polymer Spring Micro Inserts

Use the insert to ensure that the sample can be completely aspirated and improve sample utilization. The insert has a spring bottom at the bottom, which can act as a buffer during the injection pr...

Spring-bottom micro-insert

This vial comes with a fixed micro-insert tube, which is suitable for experiments to handle and analyze micro samples. The vial made of plastic material has good chemical resistance and is not eas...

PP micro vial

Suitable for trace sample detection, high recovery rate, providing you with the most reliable analysis. The inner tube has a spring-loaded base for self-alignment.

Spring bottom vial insert

This small vial is suitable for microscale experiments, with a 1ml capacity ideal for loading small amounts of samples, especially suitable for expensive or rare samples. Available in two colors, c...

1ml shell vial

Made of glass, HPLC sample vial inserts come in three different styles: flat-bottom, conical, and spring-bottom inserts. Using inserts minimizes sample loss and reduces the risk of sample contamina...

HPLC Vials Micro Inserts

Spring-bottom sample vial insert Featuring a spring-bottom design, this sample vial insert provides superior sealing, ensuring a tight fit between the insert and the vial cap, effectively preven...

Spring-bottom sample vial insert

Conical insert tubes enable precise sample introduction. The design of conical insert tubes helps minimize sample loss, making them suitable for the detection of trace samples. Using conical ...

Conical Bottom Vial Insert for HPLC Vials

PP micro sample vials are suitable for collecting samples for analysis, testing, and experiments, and can also be used for storing and transporting micro samples. Featuring a snap cap design (Aijir...

PP micro sample vials

Aijiren 1ml Shell Vial is compatible with Waters WISP™ 96-bit autosampler. The bottle is made of sprayed silicate glass. The vial cap is made of polystyrene to make the top of the starburst easie...

1ml Shell Vial

Aijiren pp vials are made of polypropylene. Need to be used with 11mm snap top vial cap. The PP bottle comes with a fixed micro insert. Compared with glass vials, PP vials do not need to be broke...

11mm PP Micro Vial

Our conical inserts are made of clear glass and are required for use with vials The use of inserts can avoid sample contamination caused by reuse of vials, increase sample recovery rate, and exten...

Micro Inserts

For HPLC The starburst cap facilitates needle insertion and avoids needle jamming. Caps need to be purchased separately, convenient and affordable combination for non-critical sample analysis Ca...

1ml Shell Vial

Use Aijiren's own crimp vials with inserts to maximize sample injection during sample analysis. The vial has a fixed insert to prevent the insert from shifting, which may cause damage to the syr...

Glass Crimp Vial with Fused Insert

AIJIREN supplies a variety of styles of micro vials to meet your various needs in micro experiments. Our inserts are made of clear glass and are suitable for 9, 10, and 11mm vials. The use of in...

AIJIREN micro insert

PP Micro Vial, combines the advantages of micro inserts and PP vials. Ideal for water and protein analysis, the built-in fixed micro-insert eliminates insert migration and maximizes sample recov...

PP Micro Vial

AIJIREN produces micro inserts. The use of inserts can significantly improve the sample recovery rate and avoid errors in detection data caused by contamination caused by reuse of sample vials. ...

Conical Bottom Vial Insert

Use micro inserts to maximize sample recovery and avoid contamination of sample vials. More economical and affordable than automatic injection vials. Can be used with 1.5/2ml hplc vials

AIJIREN three micro inserts

The insert is made of glass with a polymer spring on the bottom. The size is 29mm*5.7mm and the capacity is 250ul. It is suitable for all 1.5ml vials and 9mm, 10mm and 11mm sample bottles. Th...

Vial Insert，Glass Spring Bottom

Used with AIJIREN vials, it can be used with 8mm, 9mm, 10mm, and 11mm sample vials. Use inserts to avoid sample contamination caused by improper cleaning of vials, which may affect detection.

AIJIREN Micro Inserts

The bottom of the insert is funnel-shaped. This design allows the sample to be collected more accurately and the sampling needle to sample more easily. The insert is embedded in the vial and can...

Conical Bottom Vial Insert

Polyethylene microvial, this product is made of polyethylene. Compared with glass vials, using polyethylene as the bottle material is less likely to break, wear, and sample contamination. Polyeth...

Polypropylene Micro Vial

This product is used in laboratory chromatography experiments and for HPLC/GC analysis. 0.3ml insert inserted into 2ml vial. The insert holds the sample during injection. Save detection volume, ...

9mm 0.3ml Glass Micro vial Integrated with Insert

Micro-Inserts are manufactured of clear glass. Three different base shapes are available, including flat bottom, concial bottom, and PolySpring (PolySpring inserts are self-aligning). Micro i...

Micro Inserts for Hplc Vials

Made of premium borosilicate glass, this product is of excellent quality and has been extensively tested for use over a wide temperature range. The polyethylene snap-on cap features a starburst ...

1ml Shell Vial

Micro-Inserts are manufactured of clear glass. Three different base shapes are available, including flat bottom, concial bottom, and PolySpring (PolySpring inserts are self-aligning). Micro i...

Micro Inserts for Hplc Vials

Vials paired with micro inserts enable the most accurate and reliable analysis of laboratory samples. It ensures economy, accuracy, maximum sample recovery rate, and easier sample removal. 250 µL...

250 μL 9, 10, 11mm Conical Bottom Vial Insert

Micro-Inserts are manufactured of clear glass. Three different base shapes are available, including flat bottom, concial bottom, and PolySpring (PolySpring inserts are self-aligning). Micro i...

Micro Inserts for Hplc Vials

Micro-Inserts are manufactured of clear glass. Three different base shapes are available, including flat bottom, concial bottom, and PolySpring (PolySpring inserts are self-aligning). Micro i...

Micro Inserts for Hplc Vials

Micro-Inserts are manufactured of clear glass. Three different base shapes are available, including flat bottom, concial bottom, and PolySpring (PolySpring inserts are self-aligning). Micro i...

Micro Inserts for Hplc Vials

Micro-Inserts are manufactured of clear glass. Three different base shapes are available, including flat bottom, concial bottom, and PolySpring (PolySpring inserts are self-aligning). Micro i...

Micro Inserts for Hplc Vials

Micro Inserts for Hplc Vials have three different bottom shapes, including flat bottom, concial bottom, and concial bottom with polyspring (PolySpring inserts are self aligning). Micro-Inserts are...

Micro Inserts for Hplc Vials

Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and ea...

Micro Inserts for Hplc Vials

· This vial is used in chromatography laboratories · High quality glass vial for HPLC/GC analysis · 0.3 ml clear glass micro insert fixed in 2ml glass vial, · Conical base insert vial to preserve...

0.3ml 11mm Glass Crimp Vial with Fused Insert

Micro inserts can be used with screw tops, crimp tops, or snap top vials.

Vial Inserts for 2ml Screw Vials

300ul fixed insert integrated sample vial, micro sample injection
The opening is 40% larger than the standard small diameter, and the vialneck is processed finely, which is convenient for the handling of the robot arm

300ul fixed insert integrated sample vial, 11mm crimp top

0.3ml 9mm screw vial integrated with micro insert, base bonded, type: clear, amber, clear with writing patch, amber with writing patch; Size: 11.6*32mm for hplc analysis

0.3ml 9mm glass screw vial integrated with micro insert

Flat Bottom Micro-Insert 250ul 300ul, clear glass, size: 31*5mm(250ul) suit for 8-425 vials; 31*6mm(300ul) suit for 9mm, 10-425, 11mm vials.

Flat Bottom Micro Insert for HPLC Vials

Conical Micro Inserts, volume: 150ul & 250ul, size: 31*5mm(150ul), 31*5.7mm(250ul), suit for 8-425, 9mm, 10-425, 11mm vials. In order to meet the needs of micro-injection, micro-intubations of different capacities and structures can convert the sample bottle from full capacity to limited capacity in a simple step.

Conical Micro Insert for 2ml Vials

Micro-Insert with Mandrel Interior & Polymer Feet, Suitable for 8-425, 9mm,10-425, 11mm snap vials, volume: 150ul-250ul, size: 29*5mm(150ul), 29*5.7mm(250ul)

Glass vial inerts with polymer feet for 2ml autosampler vials

300ul volume plastic vials, 11mm snap neck finish, 11.6*32mm, Vial material: polypropylene, cap material: polyethylene, septa material: ptfe/silicone, package: 100pcs/pk

11mm 0.3ml snap micro vial plastic

Volume: 300ul
Vial Size: 11.6*32mm
Material: Polypropylene (pp)

9mm 300ul PP Screw neck Micro Vial for HPLC

When glass is not feasible, polypropylene plastic material provides a wise choice
Cone plug-in supports samples of the highest purity and sensitivity
Clear colors provide an unhindered view of the solution to observe any changes
The industry’s highest quality ISO9001:2015 certification ensures the most accurate analysis of samples

Micro Insert with Polymer Feet

Select the insert for your sample£º1.Polyspring inserts are self-aligning and provide a cushion against needle contact. 2.Precision point inserts minimize residual sample loss. 3.Pulled point inserts are an economical choice for noncritical applications.

2ml HPLC Vial with Micro-Insert