2ml Clear Glass Snap Vial

2ml snap amber sample vial
Features: 32*11.6mm vial; 11*1mm Teflon/silicone septa; 11mm white open PP cover.

Snap Cap is made of high-quality PP. The design with a center hole is convenient for automatic sample injection. Septa’s design uses a combination of silicone and PTFE, which is easy to penetrate and is not easy to fall off and contaminate the sample. Aijiren is supplied as a professional chromatography consumable The supplier can provide customers with different types of various closures, and years of production experience are worthy of rest assured.

Aijiren Vials have a standard 11.6x32mm profile and are compatible with convenient 11mm snap cap or aluminum seal closures. The ¡°Step¡± design ensures proper centering of limited volume inserts, eliminating missed injections.

Using bayonet vials is a simple and effective way to ensure tightness without the need for crimp seals. It’s as easy as pushing in or pulling out. Compared with other bayonet covers, it can always provide better safety sealing. Use with 11mm natural or blue bayonet opening cover and various septa.

The 1.5ml high-quality snap vial USP Type I is made of 33 borosilicate transparent glass (USP Type 1, Type A) or 51 amber glass, and the bottom is even and flat, which can ensure the safety of the blade. The sample vial has a writable spot and can provide 0.5, 1.0 and 1.5 ml graduations.

Snap caps used with the Aijiren snap Vial system are a convenient alternative to aluminum seals,Snap caps or aluminum seals ensure a secure seal for sample.

1.5ml Snap vial easy to use, ideal for storing powder samples. Because it is a push-type cap, it is not suitable for transporting liquid, an audible click ensures a secure seal has been formed and that the cap is correctly aligned. The temperature range of the snap top sample vials is 0-125 ¡ã C, and the temperature range of the cap is -40-70 ¡ã C.

The Closures for the 11mm Snap Vial produced by Aijiren use high-quality materials, especially Septa. Aijiren uses a composite process, using silicone rubber and polytetrafluoroethylene to make septa.

2ml snap vial is made of transparent or amber type 1 borosilicate glass (type A, 33 expanded borosilicate glass) or polypropylene. The snap-on vial can accept either aluminum snap-on seals or polyethylene snap-on caps. Very suitable for short-term storage. You can also deactivate MS authentication.

Snap Cap vials Wide-mouth vials are easy to fill and provide a larger target area for the autosampler needle. Suitable for most autosamplers, it can hold 12x32mm sample vial format, high-quality 33 expanded borosilicate transparent glass type 1 (type A) or 51A amber glass uniform, flat bottom ensures that Vial can stand stably on the desktop.

2ml snap vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The bayonet cap or crimp cap can be used to close the bayonet vial. The snap cover can be easily pushed in or pulled out by hand.

The bayonet sample vial can be sealed with a snap-fit cap, and the cap of the bayonet cap does not need to be capped or removed. Tools can be installed and removed. Polyethylene vial caps are chemically inert and suitable for most chromatographic applications.

The Snap Cap produced by Aijiren is made of polypropylene with Septa in the middle. Place the Cap on the Via and press it down with your hand to hear a “click”. If the cap is tight, it is difficult to sample. If the installation is too loose, the seal is not very good and the septum may fall off.

Snap Cap vials Wide-mouth vials are easy to fill and provide a larger target area for the autosampler needle. Applicable to most autosamplers, it can accommodate 12x32mm sample bottles, high-quality No. 33 No. 1 expanded borosilicate clear glass (Type A) or 51A amber glass uniform glass, flat bottom to ensure that Vial can be on the table Stand up steadily.

The snap top vial produced by Aijiren uses more glass in the neck of the vial, so it is not easy to break during the opening process. The snap-on seal neck can be removed without any special tools. It is recommended to use these vials for short-term sample storage and non-volatile samples, as their tightness is not as good as crimping or thread sealing.

Aijiren¡¯s snap top vials are made of Type 1 borosilicate glass and come in transparent or amber color. The snap vial can accept either aluminum snap seal or polyethylene snap cap. Very suitable for short-term storage.

11-425 snap top autosampler vial, often used in conjunction with Shimadzu, Spectrophysics, Varian and other autosamplers. The bottle is made of colorless Class 1 Type A or Amber Class 1 Type B borosilicate glass. A writable label is attached for sample identification.

Aijiren sample vials have a standard 11.6x32mm shape and are compatible with convenient 11mm snap caps or aluminum sealing caps. The “stepped” design ensures the correct centering of the automatic injection needle, thereby eliminating missed injections

These clear glass or polypropylene inserts for 11mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes ranging from 300¦ÌL. Pulled point inserts are an economical choice for non-critical applications

Aijiren sample vials have a standard 11.6x32mm shape and are compatible with convenient 11mm snap caps or aluminum sealing caps. The “stepped” design ensures the correct centering of the automatic injection needle, thereby eliminating missed injections

Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass£¬Aijiren Vials have a standard graduated write-on patch for easy filling and identification¡£Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals£¬Snap caps ensure a secure seal for samples

Vials with micro blades are becoming more and more popular in small batch sample processing. Aijiren vials combine the robustness of glass vials with the advantages of glass microinserts. The glass microinsert is firmly fixed in the conical cup of the vial with its edge slightly over the edge of the vial to ensure a tight seal between the septum and the glass.