0.45 Syringe Filter

PTFE disposable syringe filter is a fast, convenient and reliable filter tool, often used in laboratories. It has the characteristics of beautiful appearance, light weight and high cleanliness. Because there is no need to replace the filter membrane and clean the filter, it saves tedious and time-consuming preparation work. It is widely used in laboratories, widely used for sample pre-filtration, clarification and removal of particulate matter, and sterilization and filtration of liquids and gases.

The PTFE membrane equipped with Syringe Filter by Aijiren has extensive chemical compatibility and extremely low solubility, and is currently the most chemically resistant membrane among all filter membranes. Aijiren’s innovative design enables the PTFE filter to achieve a perfect balance between increasing the effective filtration area and reducing the sample retention volume. Usually the packaging is 100 pcs/pack, in bags or drums.

Syringe Filter membrane: HPLC certified nylon.
Used for: bases, most HPLC solvents, alcohols, aromatics, THF.
Do not use for: acids, corrosive halogenated hydrocarbons, protein samples (nylon is a high binder)
Sterilization: The syringe filter can be sterilized by an autoclave at 125° for 15 minutes.
Application: General laboratory filtration, most HPLC samples

Nylon Syringe Filter has good hydrophilicity, acid and alkali resistance, and oxidation resistance. It can be used for alkaline blotting and fixation. If fixation methods such as baking and ultraviolet light are used, higher nucleic acid detection sensitivity can be obtained. Since the nylon membrane is a hydrophilic membrane, it does not need to be immersed in a solution such as ethanol or methanol for activation. Nylon Syringe Filter is suitable for organic solvents, such as alcohols, hydrocarbons, lipids, phenols, ketones and other organic solvents. Nylon Syringe Filter can also be used for organic solvents such as strong acids, 70% ethanol, and methylene chloride. High temperature resistance, good strength, stable chemical properties.

The Nylon syringe filter produced by Aijiren is highly recommended for pharmaceutical laboratory analysis due to its hydrophilic properties. The Nylon syringe filter is very suitable for applications that require low extractability. The Nylon syringe filter also has very high chemical resistance, so it is very suitable for testing corrosive solutions in the filtration of pharmaceutical research and development laboratories. Due to the characteristics of the nylon syringe filter, it is very suitable for HPLC, GC or dissolved sample analysis, and is widely used in most biological agents, electronic semiconductors, industrial water filtration, chemical filtration and beverage filtration.

Aijiren’s PTFE polytetrafluoroethylene is a membrane that is very suitable for filtering samples and highly corrosive substances based on gas or organic solvents. The hydrophilic PTFE membrane provides you with chemical resistance to corrosive media and excellent temperature stability, thereby expanding the sampling range. More applications of PTFE syringes are: for analysis and research applications and air sampling. Use in extreme chemistry or temperature. Used to filter non-aqueous organic solvents. It is also ideal for filtering highly aggressive colloidal solutions.

Aijiren’s PTFE syringe filter does not contain tritium and has a two-way membrane support, which is very suitable for syringes. The membrane type and pore size are printed on each filter for easy identification. All Aijiren syringe filters are 100% integrity tested and comply with ISO standards. PTFE (polytetrafluoroethylene) performance: suitable for water systems and various organic solvents, and resistant to all solvents, low solubility. It is breathable and impermeable, large air flux, high particle retention rate, good temperature resistance, resistance to strong acids, strong alkalis, organic solvents and oxidants, aging resistance, non-sticky, non-flammable, non-toxic and biocompatible. Its related products are widely used in chemical, pharmaceutical, environmental protection, electronics, food, energy and other fields.

Nylon has good chemical stability, flexibility, durability, not easy to tear, can withstand saturated steam autoclaving, and is suitable for filtering aqueous solutions and most organic solvents. Such as electronics, microelectronics, semiconductor industry water filtration, tissue culture media filtration, liquid medicine filtration, beverage filtration, high-purity chemical products filtration. Generally tolerate the range of PH3-14.

13 mm devices for samples up to 10 mL and 25 mm devices for samples greater than 10 mL (however, the volume of sample that can be filtered through each filter depends on the characteristics of the sample)£¬Minimizes sample contamination.

0.2 ¦Ìm hydrophobic PTFE air filters are excellent industrial air filter media£¬ Testable by water break through (WBT) test or bubble point testing£¬ Manufactured in clean room facilities£¬ Range of filtration areas from 4¨C2000 cm2.

Membrane: HPLC Certified Nylon.
Use with: Bases, Most HPLC solvents, Alcohols, Aromatic Hydrocarbons, THF.
Don¡¯t use with: Acids, Aggressive Halogenated hydrocarbons, protein samples (Nylon is a high binder)
Sterilization: Syringe filters can be sterilized by autoclave at 125¡ã for 15 minutes.
Applications: General Laboratory filtration, most HPLC samples